SZ10-NEMA-M2, it is base with 7 pin and ANSI C136.41-2013 standard, so our lighting controller is feature play-in-plug mount anywhere outdoor outside light base module. As a future smart city wireless communication node,  this is enable more simple design, smarter operation through remote terminal service system and communication protocol.

Simply design base on the wireless communication module and multi-function interface, so can load other sensing or actuator until ideal saving and improve human-life functionalities controller.  another aspect is supportable scalable communication uart protocol, here is compatible different terminal management system among these node built-in intercommunication bridge.

On the smart operation aspects,  here you can stand in remote terminal monitor room and you can know lighting node work status on the few kilometers. such as lighting fixture voltage, lighting during times, lighting fault, lighting controller troubleshooting. these are direct eye in our, you should open PC control display where look find different zone. if you want dimming time length or brightness, you can switch energy-effective mode, midnight dimming or dynamic dimming,and like lighting work start-stop when day open, when night off, you can on the visual panel to be continue.

Feature

1. One way switch and 0～10V dimming signal output
2. Over-current protection, lamps condition detection and default lighting functions
3. available support communication protocol: LoRaWAN/LoRa-Mesh, Zigbee, Cat.1
4. ntenna frequency band:2.4G, free support global communication band
5. 2 switch TCP communication
6. RTC or OTA ungrade management.